When use milling power head, what should notice? Milling power head operation has certain risk.
1, before operation checks the mechanical, instruments and tools, etc. in good condition.
2, machine tool insurance screws and pins must not loose.
3, the rotating part shall not put the tools, measuring tools or other objects.
4, check the oil level and oil standard should have sufficient amount of oil.
5, operating personnel should wear overalls and tighten cuffs, don’t wear gloves while working with long hair and hair should be set into the cap, it is forbidden to wear shorts, skirts, sandals or slippers.
6, machine tool exposed belt drive shaft, gear, pulley etc protective cover intact. Machine tool should be good grounding.
7, operating personnel may not leave work without authorization in the process of work, the fixture should be in good condition.
8, oil pressure system oil-way should be tight, smooth, oil pressure, oil mass and oil temperature should be kept within the specified range.
9, machine tools oil and debris on the ground around should be cleared in time.