First, we must first understand the precautions before using the power head
1. The first use of the power head need to run, the best one hour load, no-load speed is the maximum speed of 70%.
2. After the cooling fluid to be filtered in order to put to use, not filtered coolant can cause damage to components, such as power tool holder of internal parts and seals, resulting in excessive wear can not be used, affecting productivity, do not forget to turn on to cool before using was opened, which is to reduce oil seals and mechanical wear and tear, so pay special attention.
3. Followed by the knife problem, within a defined rotational speed to be at work, not speeding, but the water pressure is limited and can not exceed that limit, to avoid unexpected production.
4. Before using the standby status checking various components, such as the water has no place to plug, not hot water, etc., when you close the external water, simply tighten the screws
Second, secondly we have to introduce the power head under maintenance precautions during use
1. A day after the appearance of the maintenance work is completed, will be to advance the power head cleaning rod, drill chuck or multi-axis drilling head, knives, etc. of iron, keeping the look clean power head
2. Lubrication and maintenance cleaning done, remember to push rod and drill chuck with the right amount of lubricant.
3. Regular cleaning and maintenance of electrical motors, inspection of electrical installations, and ensure that the fixed electrical installations, security and tidy.
4. Regular inspection and maintenance of parts of the screw fastening bolt, belt tension, the shield is intact, hydraulic damper oil leaks.
Third, extend the power head of maintenance considerations
When the power head failure, should not casually demolished, will be to find the cause and then prescribe the right medicine. In case of do not understand why, given should telephone contact manufacturers and repair under the manufacturer’s instructions; if not repair, could return to the factory or service agency. And timely replacement of the power head of “overage” parts and consumable parts have been damaged. Under normal circumstances, the power head should monitor maintenance once a year, should not let the power head to work sick.
Fourth, and finally the power head is stored in the non-use considerations period.
When the power head without using, be sure it is cleaned and then coated with anti-rust oil, and placed in a dry place.
Power head is used to make money in equipment. The longer the life of the power head, will create greater economic benefits for us. Therefore, to extend the life of the power head fixed to note the above points.