Abstract: Multiple spindle drilling machines are commonly known as multi-axis machine, porous drill or multi-axis drilling machine. Multi-axis drilling machine in the process of work we should everywhere pay attention to details, so as to avoid failure.
Multiple spindle drilling machines are commonly known as multi-axis machine, porous drill or multi-axis drilling machine. It’s a kind of applied in mechanical field drilling, tapping machine tool equipment. Multiple spindle drilling machines first appeared in Japan, after Taiwan was introduced into China. It has a history of 20 years. Actually it is mounted on the drilling, tapping machine cutter head, and is more than two shaft processing drilling or tapping parts at the same time, therefore calls multi-axis drilling machine.
Multiple spindle drilling machines should always pay attention to details in the work process:
First, Multiple spindle drilling machine working mesa adjustment:
1) Push the workbench can be left and right move.
2) Loosen the set screws to shake hand table up or down.
3) After the adjustment, the fixed screw fixed tightly.
Second, multiple spindle drilling machine drilling jig does not knock, need wrench elastic fixed or drill bit.
Three, anti running used for centering position and drill clamp ruled out.
Four, multiple spindle drilling machine speed adjustment in accordance with the drill bit size adjustment of pulley, the pulley on the aperture large speed slow.
Five, when drilling holes, drill bit cannot pay attention to the platform or fixture.
Six, homework, can’t wear gloves.
Seven, when drilling to give workpiece was the location of the drill a center point.
Eight, artifacts such as drill small need to fix clamp, do not use hand to work stable.
Nine, Multiple spindles drilling machine to drill the aperture are greater than 10mm, should be 2-3 times from small to the large hole.