Multi-axis machine widely used in the machinery industry porous parts of drilling and tapping processing. The number of the spindle and between the spindle distances can be arbitrary adjustment, a feed processing several holes at the same time. Can work together with drilling machine, compared to single shaft drill, work piece machining accuracy high, fast efficiency, can effectively save manpower, material resources, the most important thing is that drilling machine automation greatly reduce the labor intensity of operators.
When multi-axis machine and drilling machine at work with some things：multi station combination machine tools
1, before use multi-axis machine check: chuck whether in good condition; Work surface whether parallel.
2, multi-axis machine starts steps: make the main motor running. According to the processing requirements can choose two operation methods are forward operation and reverse operation. Forward operation: will motor operation button to pull in the forward operation position, can make the motor forward operation drive drill movement; Reverse operation: will motor operation button to pull in the reverse operation position, can make the motor reverse operation rotation drive hand wheel operation.
3, multi-axis machine in use should notice: drill jig is not knocking, need wrench elastic fixation; Needing attention drill can’t drill to the platform or drilling fixture; When drilling need to decide a center first of work piece by drill location; Drilling machine speed adapt to drill bit size adjustment belt pulley do the adjustment; Drilled work piece is too small to need to use clamps to fixed, be sure not to use hand to do steady work.
4, after use multi-axis machine should note: after parking, will clean iron filings of the mesa and ground, tools homing, after being all dealing with good, may leaving work place.
5, multi-axis machine downtime steps: when every noon a rest, get off work or stop working that should make the drilling machine be stop state. Stop operation: the motor operation selected button to pull in the OFF position, make it stop, and cut off power supply.